Aico Hard Wired Relay Module
Manufacturer : Aico
Next Working Day - Order by 1.00PM
A mains powered easy to install module that triggers external devices if the alarms on the system are activated.
The Aico EI128R Hard-Wired Relay Module is a mains powered Relay Module that triggers external devices, such as a strobe light or telecare device, if the alarms in the property activate. The Aico Ei128R Module has additional trunking knockouts to make it as easy to install as possible and is designed to fit underneath the space of easi-fit or RadioLINK base. However a cover is supplied if needed and contains a set of volt-free contacts as standard. The Relay can be configured to give a 230V output or a 24V output using an external 24V supply
On receiving a signal from the alarm system, the relay contacts will be operated causing a signal to be sent to the device to which it is connected. The Ei128R can be used to switch into a range of devices, ranging from indicating lights to magnetic door handles.The module can be switched to give a pulse output, or continuous output for different applications. The Relay is designed to operate whilst the alarm system is sounding, to signal ancillary devices such as door closers, extractors, remote sounders etc.The Relay is mains powered and operates on receipt of a signal from the interconnect line of a smoke, heat or CO alarm. The relay does not operate if mains power is not present.Volt free contacts – (Normally Open or Normally Closed) rated up to 240V AC/5 Amps ,making it suitable for use with a wide range of AC or DC voltages.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system (1 x Ei128R counts as one unit).Fitted with a 4 way connector block for ease of wiring.The relay can be set for Continuous or Pulse operation by operation of a manual switch – when in Pulse operation mode, the relay contacts will automatically switch back to their original state after 5 seconds