Aquarius Undersink Vented Storage 3.0kW 10.0 L
3 to 5 Working Days
The Aquarius Undersink Vented Storage unit can provide hot water to one sink when used with vented taps. The unit is available in two water capacities and kW ratings. The 1.2 kW model can be installed in situations of a limited power supply, for example, temporary or portable buildings. The 3kW model allows for a faster heat recovery times. There is an easily removable copper sheathed element for convenient replacement. It is constructed from anti-corrosion treated substantial gauge sheet steel, finished with white stoved enamel.
This unit can be connected to the water mains or a cold-water cistern but in both cases, a self-venting tap must be used. A minimum head pressure of 4 metres is required for this unit. A self-venting tap can be avoided if hot water expansion is discharged back into the cistern through a vent pipe plumbed from the hot pipework. If the Aquarius Undersink Vented Storage Unit is connected to a cold water cistern it must be no lower than 10 metres below the base of the Cistern.
|SKU||Model / Capacity (L) / Output (kW)||Dimensions (H x W x D) mm||Weight (full) Kg|
|94010008||Aquarius AU7/3 / 7.0 L / 3kW||356 x 240 x 240||11.9|
|94010009||Aquarius AU7/1 / 7.0 L / 1.2kW||356 x 240 x 240||11.9|
|94010010||Aquarius AU10/3 / 10.0 L / 3kW||442 x 240 x 240||15.9
In order for compliance with BS 7671 "Requirements for electrical installations" (IEE Wiring Regulations). It must e fully earthed and permanently connected to the electrical supply through a double pole linked isolating switch with minimum breaking capacity suitable for the loading.
- Models are available with a thermal fuse cut-out fitted in series with the adjustable thermostat.
- CE marked and Kiwa approved.
- 2 years product warranty with on-site service support.