EV 2008 Point of Use Handwash Unit
3 to 5 Working Days
A cost efficient easy to install handwash unit which is ideal for use in commercial settings
The Santon EV 2008 Point of Use Handwash Unit is a cost efficient hand wash unit which is ideal for use in commercial settings. The "push-fit" plumbing connection allows for ease of installation. The water is heated within the unit, meaning it is energy efficient and no excess water is heated. The heating element is 3.1 kW copper sheathed rod-type. The EV 2008 is compact in size (H 36mm x W 151mm x D 98mm) and will easily fit into small spaces. There is the option for the water and electrical supply to be made from the rear of the unit to allow for neat installation. The units have a swivel spray outlet to supply one basin. The spray outlet includes a low velocity spray plate, greatly reducing the risk of splashing. These units have good flow rates even with low inlet water temperature.
There are a number of safety features with this design, including a temperature stabiliser to allow stable water temperature over different water pressures. There is a pre-set safety cut out to prevent overheating. The unit also includes a pressure relief device in case the unit becomes blocked or frozen. The minimum water pressure for this unit is 1 bar, the maximum is 7 bar.
Special requirements of the IEE wiring regulations should be observed when installing in bathrooms. Units must be permanently connected to the electrical supply through a double-pole linked isolating switch. The unit can be supplied from a ring final circuit via fused spur with a double-pole linked isolating switch with a 13A minimum breaking capacity. Cable - 1.5-2.5mm squared.
- 3.1 kW element rating
- 2 years product warranty with on-site service support.
- CE Marked