• Free Next Day Delivery

    On selected items

  • Braintree Payments
    Safe & Secure Shopping

    Powered by Braintree, a PayPal company

  • Independent

    Family Owned

EV 2008 No Touch Point of Use Handwash

Manufacturer : Santon
£130.00
SKU
SANT-94020017
Delivery Time:

3 to 5 Working Days

 A hygienic and easy to install unit ideal for use in commercial settings, especially food preparation environments.

More Information
Cylinder Type N/A
Heat Source N/A
Immersion Length N/A
Power Source N/A
Capacity N/A
Finish N/A
Cups p/use N/A
Details

The Santon EV 2008 No Touch Point of Use Handwash Unit is a hygienic and easy to install unit ideal for use in commercial settings, especially food preparation environments. The "no touch" feature allows for an extra layer of protection against cross-contamination. The "push fit" connection to the water supply allows for ease of installation. As the water is heated within the unit, it is energy efficient because no excess water is heated. There is a 3.1 kW copper sheathed rod-type heating element. These units have good flow rates even with low inlet water temperature.

The units are compact in size (H 36mm x W 151mm x D 87mm) and will fit easily into small spaces. These units have a swivel spray outlet and supply one basin. The spray outlet includes a low velocity spray plate which removes the risk of splashing, as the spray pattern stays the same when the water flow is changed.

There are a number of safety features included in this design, including a temperature stabiliser to allow stable water temperature over different water pressures. There are two levels of pre-set safety cut-out to prevent overheating. The first safety cut-out is set at 52 Degrees Centigrade and resets to allow normal function when the water has cooled to 42 Degrees Centigrade. The second level of safety cut out is for 92 Degrees Centigrade and is not resettable. The unit also includes a pressure relief device in case the unit becomes blocked or frozen. The minimum water pressure for this unit is 1 bar, the maximum is 7 bar. 

Special requirements of the IEE wiring regulations should be observed when installing in bathrooms. Units must be permanently connected to the electrical supply through a double-pole linked isolating switch. The unit can be supplied from a ring final circuit via fused spur with a double-pole linked isolating switch with a 13A minimum breaking capacity. Cable - 1.5-2.5mm squared.

  • Complete protection against excessive pressure build up within the unit and the dangers of scalding.
  • 3.1 kW element
  • No Touch design reduces cross contamination
  • 2 years product warranty with on site service support.
  • CE Marked
Copyright © 2019 ERF Electrical Wholesalers Ltd. All rights reserved.