Aqualine Unvented Water Heater 15.0 L 4.5kW
3 to 5 Working Days
The Santon Aqualine Unvented Water Heater allows water to be stored above 60 Degrees Centigrade whilst still dispensing at handwash temperature. The TVM2 thermostatic blending valve enables a larger volume of blended water output. Water storage at 60 Degrees or above reduces considerably the possibility of bacteria being harboured. This design makes Aqualine a great choice for buildings where "safe" water is needed, such as nurseries, schools or nursing homes. A temperature control thermostat enables the user to set the water temperature, with temperature lock included. There is a resettable over-temperature cut-out to enhance safety. The water storage temperature can be set from 10 - 70 Degrees Centigrade. The output temperature is controllable from 35 - 60 Degrees Centigrade. This versatile water heater is available in three capacities and two kW ratings making it suitable for a range of commercial settings.
There are two accessory kits which are essential to a safe installation. The maximum water pressure must be known before installation. To find this information the local water authority may be consulted. Where the maximum pressure is less than 4.1 bar and there is not enough pipework to accommodate the hot water expansion or the water expansion cannot drain back down the mains, then kit ALK02 must be used. The recommended minimum water supply pressure for the Aqualine is 1 bar and the maximum 4.1 bar. If the maximum water pressure is above 4.1 bar then it is essential that kit ALK01 must be used.
Model /Capacity (L) / Output (kW)
|Dimensions (H x W x D) mm||Weight (full) Kg / Basins filled (avg.)|
|94050012||AL07/3 / 7.0 L / 3kW||456 x 240 x 240||13.5 / 1 - 2|
|94050013||AL10/3 / 10.0 L / 3kW||542 x 240 x 240||17.5 / 2 - 3|
|94050014||AL15/3 / 15.0 L / 3kW||517 x 330 x 330||26.6 / 3 - 4|
|94050015||AL15/4.5 / 15.0 L / 4.5kW||517 x 330 x 330||26.6 / 3 - 4|
The number of basins is only a guideline and may vary depending on local conditions and water hardness. The Aqualine Unvented Water Heater is constructed from anti-corrosion treated substantial-gauge sheet steel finished with white stoved enamel. The alloy sheathed element is easily removable for convenient replacement.
- The 3kW models are Kiwa and Nemco approved
- The 4.5kW models are Kiwa approved and CE marked.
- Two years product warranty with on site service support.