•  
    Free Delivery

    On Orders Over £50

  •  
    Safe & Secure Shopping

    Powered by Braintree, a PayPal company

  •  
    Seen it cheaper elsewhere?

    Call us on 0115 964 9181

Aquaheat Small Unvented Water Heater 10.0 L

Manufacturer : Santon
£199.00
SKU
SANT-94050002
Delivery Time:

3 to 5 Working Days

Available in capacities of 7, 10 and 15 litres meaning a variety of commercial applications can be met, for example, low demand canteen use, dishwashing and handwashing.

More Information
Capacity 10.0 L
Details

Aquaheat Small Unvented Storage Heaters are available in capacities of 7, 10 and 15 litres meaning a variety of commercial applications can be met, for example, low demand canteen use, dishwashing and handwashing. These units are very cost-effective to install and since they are unvented no additional vented taps are needed. 

SKU Model / Capacity (L) / Rating (kW) Dimensions (H x W x D) mm Weight (Kg)
94050001 AH7/2.2 / 7.0 L / 2.2kW 356 x 240 x 240 11.9
94050002 AH10/2.2 / 10.0 L / 2.2kW 442 x 240 x 240 15.9
94050003 AH15/2.2 / 15.0 L / 2.2kW 417 x 330 x 330 25.0

The units are connected to the mains water supply, meaning that mains water pressure is given from both hot and cold taps. 

Capacity of Water Heater Number of Basins
7.0 Litres 1 - 2
10.0 Litres 2 - 3
15.0 Litres 3 - 4

 Aquaheat Installation

There is an up to 4% increase in the volume of hot water as it is heated, this increase must be accommodated within the system. With unvented water heaters less than 15.0 L this expansion can be accommodated within the supply pipes providing the following conditions are all met:

A. The maximum supply pressure is below 4.1 bar.

B. The minimum length of the supply pipework from the heater to the nearest cold draw-off is not less than that specified for the heater used.

C. The expansion in the cold water mains is not prevented or restricted by a stop valve, non-return valve, water meter or similar device. 

If the pressure cannot be guaranteed to stay below 4.1 bar then Kit ALK04, which includes a pressure reducing valve, non-return valve and an expansion vessel is needed for safe installation.

If the mains cold water supply pressure is guaranteed to stay below 4.1 bar but any of the other conditions above are not met then Kit ALK05 is needed, which includes an expansion vessel and non-return valve.

Copyright © 2019 ERF Electrical Wholesalers Ltd. All rights reserved.