7.0 L Streamline Undersink Vented Storage 1.0kW
7 to 10 Working Days
A versatile unit ideal for settings where only small amounts of hot water are needed, for example, small office kitchens and washrooms.
| Cylinder Type | Vented |
|---|---|
| Capacity | 7.0 L |
| Finish | White |
The Heatrae Sadia Streamline Undersink Vented Storage is a versatile unit ideal for settings where only small amounts of hot water are needed, for example, small office kitchens and washrooms.
Only mains electricity and a cold water supply are needed. A range of over fifteen open vented taps are available for the undersink model. The streamline is available in a choice of two kW ratings to give faster heat up times if desired. There is also included an externally adjustable thermostat which can be set from 5-70 Degrees Centigrade.
The heating element is alloy-sheathed for long life. There are a number of safety features with these units, including, an optional 40 Degrees Centigrade temperature lock for when the unit is used for handwash, dry start cut out and anti-frost protection.
| SKU | Type | Dimensions (H x W) mm | Weight (full) Kg |
| 95010280 | 7 litre 1kW | 477 x 178 | 10.4 |
| 95010282 | 7 litre 3kW | 477 x 178 | 10.4 |
| 95010284 | 10 litre 1kW | 477 x 278 | 13.8 |
| 95010286 | 10 litre 3kW | 477 x 278 | 13.8 |
For the undersink model the water pressure from the mains should be no lower than 0.34 bar (0.034MPa) and no higher than 2 bar (0.2MPa). A pressure reducing valve must be fitted if the mains pressure is higher than 2 bar.
It is recommended that a WRAS listed isolating valve (not supplied) is fitted on the cold water supply to the heater for servicing.
- The water in Streamline will expand during heating causing the tap to drip. This is normal with vented units and is not a fault. The outlet valve must not be tightened as this will cause pressure damage to unit.
- These units are suitable for AC electricity supply only.
- Two-year guarantee with on-site service support.
- IPX4 Rated
