UTC 99 Electric Vented Water Storage 3.0kW
7 to 10 Working Days
The Heatrae Sadia UTC 99 Electric Vented Water Storage has a 15L capacity and is made for confined spaces such as single washrooms, worktop counters, and smaller offices.
All that is needed is mains electricity and a cold water supply then this unit can be vertically mounted using the bracket included or it can be floor mounted via the base. The plumbing and electrical connections are found at the top of this unit. The plumbing connections must always be made at the top if this unit.
The UTC 99 is available in two kW ratings and includes a thermostat set at 60 Degrees Centigrade which can be adjusted from 10-70 Degrees Centigrade and locked in a hot or mid-range position. A safety feature of an over-temperature cut-out is also included.
These units must not be installed where they may freeze, and the water connections must always be at the top of the unit. The minimum recommended supply pressure is 0.4 bar and the maximum head pressure when cistern fed is 2 bar.
If the unit is to serve one or more conventional taps, then a cistern-fed cold water supply MUST be used. The cold water cistern must comply with Water Byelaw 30. The maximum head distance must not be more than 20 metres. It is not recommended to supply a shower from UTC 99.
When this unit is supplied by the mains, it must be installed as an open outlet/vented water heater. The outlet acts as a vent and must not be connected to any tap/fitting not recommended by Heatrae Sadia. Please see accessories for a range of open outlet (vented) taps. If installing this unit as an open outlet/vented water heater, only one set of taps can be served. When using this type of installation, it is normal for water to drip from the taps. Do not tighten the valve in the taps as this will damage the heater.
|SKU||Output (kW)||Dimensions (H x W x D)||Weight (full) Kg|
|95010702||1.5||656 x 267 x 252||23.4|
|95010703||3||656 x 267 x 252||23.4.|
- 2 Year guarantee against faulty materials and manufacture.