Handy Handwash No Touch Electric Point of Use 3.1kW
7 to 10 Working Days
The Heatrae Sadia Handy Handwash "No Touch" requires only a cold water supply and electrical connection. These units are easily installed due to the 15 mm "Push Fit" connection.The "No Touch" option allows for an extra level of safety, preventing cross contamination in canteens and food preparation environments. The unit is cleverly operated by a motion sensor instead of a traditional hand-operated dial.
|SKU||Model||Output (kW)||Dimensions (H x W x D) mm|
|95020115||Handy Handwash No Touch||3.1||369 x 151 x 87|
These units have a number of safety features, including excessive pressure protection in case the unit freezes or becomes blocked. If this situation occurs it is essential to defrost the unit fully before use. The are also two levels of safety temperature cut out. The first level is set should the water temperature rise above 52 Degrees Centigrade and will reset and allow the unit to operate again once the water has cooled to 42 Degrees Centigrade. The second level of safety cut out operates at 92 Degrees Centigrade and is not re-settable. In the case of this happening, please contact Heatrae Sadia directly for replacement parts.
There is also a flow/temperature stabiliser to allow the outlet temperature to stay the same even with changing water pressure. This also allows the units to have an even and splash free spray pattern, which adds to their convenience.
- Extended 380mm Spout (95970558) available
- 15mm female "Push Fit" connection
- 2 Year Warranty